Time: 2021-09-24

The pulverizer is one of the indispensable equipment for non-metallic ore grinding processing in the powder industry. Vertical mill has high efficiency, low power consumption, small footprint, and small one-time investment. It is widely used in barite, calcite, potash feldspar, talc, marble, limestone, dolomite, fluorite, lime, activated clay, activated carbon , Bentonite, kaolin, cement, phosphate rock, gypsum, glass, insulation materials, etc., so what issues should be paid attention to during the use of the mill?

During the use of the mill, a fixed person should be responsible for taking care of it, and the operator must have a certain technical level. Before installation, the operator must be given necessary technical training to understand the principle and performance of the mill and be familiar with the operating procedures.
As the mill generally works outdoors, the crushed materials are some large ore, so the operators of the mill must always pay attention to it. It is strictly forbidden to enter the metal block into the machine. If it is found, stop and take it out immediately, otherwise the roller will be damaged. And grinding ring;
When the mill is in use, it is necessary to strictly control the moisture of the material. Materials with too high water content can easily cause the fine powder in the mill to occupy the grinding body due to excessive viscosity, which will seriously affect the quality and output of the product.
It must be added in accordance with the prescribed standards, otherwise the final particle size will be uneven, coarse, and fine, which will affect the grinding effect.
It is necessary to grasp the adjustment of air volume and adjust appropriately according to the fineness and output requirements; whether the air volume is too large or the air volume is too small, it will have a bad effect on the effect of the last Raymond mill.