Time: 2021-06-25

The pulverizer is one of the indispensable equipment for non-metallic ore grinding processing in the powder industry. Vertical mill has high efficiency, low power consumption, small footprint, and small one-time investment. It is widely used in barite, calcite, potash feldspar, talc, marble, limestone, dolomite, fluorite, lime, activated clay, activated carbon , Bentonite, kaolin, cement, phosphate rock, gypsum, glass, insulation materials, etc., so what should be paid attention to during the use of the mill?

1. When the mill is in use, there should be a fixed person responsible for the supervision, and the operator must have a certain technical level. Before installation, the operator must be given necessary technical training to understand the principle and performance of the mill and be familiar with the operating procedures.
2. Since the mills usually work outdoors, the crushed materials are some large ores, so the operators of the mills must always pay attention to it. It is strictly forbidden to enter the metal block into the machine. If it is found, stop and take it out immediately, otherwise it will be damaged. Grinding rollers and grinding rings;
3. When the mill is in use, it is necessary to strictly control the moisture of the material. Materials with too high water content can easily cause the fine powder in the mill to occupy the grinding body due to excessive viscosity, which will seriously affect the quality and output of the product.