Time: 2018-07-03

The user of the ore mill will find that the ore mill may appear in the process of grinding the ore by the ore mill. Because of some problems, the grinding roller of the ore mill cannot rotate normally. What causes it? Does the grinding mill of the ore mill fail to rotate normally? In the above, Shanghai Joyal Mining Machinery simply said that the grinding roller of the ore mill can not rotate normally. Here, Joyal continues to explain how to solve the problem that the grinding roller of the ore mill cannot rotate.

The abnormal operation of the grinding roller sleeve during the grinding ore process is caused by the powder. For such a situation, the user needs to stop immediately, then open the observation door of the grinding machine, remove the grinding roller, and open the grinding machine. Roll off the oil and powder inside, then re-apply the lubricant and install the roller sleeve. If there is a serious wear on one side of the roller sleeve, it is necessary to replace the new roller sleeve, and the correct installation is sufficient.

In the lubrication of stone mills, the lubrication of the grinding roller is the most common one. Generally, it needs to be lubricated once before the ore mill is turned on. Because the roller and the material are in direct contact, the powder material will be easy. Entering into the inside of the roller shaft, this will lead to the failure of the grinding wheel of the ore mill, and the lubrication of the ore mill is also a measure to prevent time waste caused by the stuck roller.

The grinding roller of the ore mill is an important part of the ore mill. It is an important step for the ore mill to perform the ore grinding process. Therefore, Shanghai Joyal Mining Machinery reminds the users to pay attention to the ore. The maintenance of the grinding roller of the mill is a key point to ensure the normal operation of the grinding roller of the ore mill.